Advidia "A" Series Manual de usuario descargar pdf (Pagina 7)

Firmware User Manual

Use the default IP address of a camera:

If there is no DHCP server in the given network, the user may have to assign the IP addresses to both PC

and camera manually to make sure they are in the same network segment.

When the camera is plugged into network and it does not detect any DHCP services, it will automatically

assign itself a default IP:

192.168.0.100

The default port number would be 80. In order to access that camera, the IP address of the PC has to be

configured to match the network segment of the camera.

Manually adjust the IP address of the PC:

In the following example, based on Windows 7, we will configure the IP address to 192.168.0.99 and set

Subnet Mask to 255.255.255.0 by using the steps below:

1. Navigate to Network and Sharing Center, and locate your Local Area Connection

2. Locate the Local Area Connection and right click into Properties

3. Right click on the Internet Protocol Version 4 and select Properties.

4. Modify the IP address and subnet mask to change the IP address of computer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 111 112

Sin comentarios

Advidia "A" Series Manual de usuario Pagina 7