Advidia "A" Series Manual de usuario descargar pdf (Pagina 14)

Firmware User Manual

To adjust the volume level of the speakers connected to the PC that runs the Web Configurator in order

to hear the audio from the camera’s microphone or line-in device, use the audio controls as below:

Audio Muted:

Audio level adjusted to the maximum:

This volume control appears on the user interface only when the Audio-in function of the camera has

been “Enabled” under Setup page.

The digital output controls appear on the Live View page of the cameras with digital input/output

function. The controls allow users to manually trigger a DO device.

- Select DO Port

Each DO ports are controlled separately. For cameras with more than one DO ports, select the DO port

and press to set the output power level to high or to set the output power level to low.

Consequently, setting the port to a high power level “activates” the DO device and setting the port to a

low power level “deactivates” the DO device. For example, if an alarm is set as DO1 and is pressed,

the alarm will continuously sound until is pressed to deactivate the device.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 111 112

Sin comentarios

Advidia "A" Series Manual de usuario Pagina 14