Advidia "A" Series Manual de usuario descargar pdf (Pagina 97)

Advidia A Series Network Camera User Manual

Steps:

1. Enter RS-485 Port Setting interface:

Configuration> Advanced Configuration> System > RS485

Figure 9-17 RS-485 Settings

2. Set the RS-485 parameters and click Save to save the settings.

By default, the Baud Rate is set as 9600 bps, the Data Bit is 8, the stop bit is 1 and the

Parity and Flow Control is None.

Note: The Baud Rate, PTZ Protocol and PTZ Address parameters should be exactly the

same as the PTZ camera parameters.

9.13 Service Settings

Go to Configuration> Advanced Configuration> System > Service to enter the service

settings interface.

Service settings refer to the hardware service the camera supports, and it varies according to

the different cameras.

For the cameras support IR LED, ABF (Auto Back Focus), Auto Defog, or Status LED, you can

go to the hardware service, and select to enable or disable the corresponding service

according to the actual demands.

1 2 ... 92 93 94 95 96 97 98 99 100 101

Sin comentarios

Advidia "A" Series Manual de usuario Pagina 97